– TEST REGISTER

Resources at your finger tips.

Register Your Roof Installation

Thank you for using Restec Roofing Systems. To activate the Restec Materials Guarantee for your installation, please complete the installation log by using the forms below. Once your log has been validated we will email your unique Restec Installation Number as acknowledgement.

SELECT SYSTEM:

Be aware that the Restec Materials Guarantee is only available for the two coat (20 year) FLEXITEC Platinum application. No guarantee is available for the one coat application.
Have your Training Certificate I.D. number handy.
Have an electronic copy of your invoice ready.
Make sure you’ve got all the batch numbers of all the products you used.
Have accurate details regarding the materials quantities used on this installation.
Make sure you’ve read the Terms & Conditions of the FLEXITEC Platinum Guarantee (email enquiries@restecroofing.co.uk if you haven’t seen them)

Installer ID Number

Installer Name

Installer Company Name

Tel No.

We need your email address so we can send you your Restec Installation Number.

FLEXITEC Platinum Stockist

FLEXITEC Platinum Stockist Location

We require your invoice to validate the use of Restec Materials

Upload Invoice

Email Later

UPLOAD INVOICE

Max. file size: 256 MB.

Email Later

I will send an email attached with all my invoices - SEND EMAIL > admin@restecroofing.co.uk

Note - until received, the guarantee will not be valid

Installation Start Date:

MM slash DD slash YYYY

Installation End Date:

MM slash DD slash YYYY

Installation Address ( Including Postcode)

Roof Size (m²)

Was the roof single storey?

Yes

Please describe the weather Conditions During Installation

Temperature during installation (°C)

This is was a

Did you improve / create the falls of the road?

Yes

The roof is situated above

The roof we installed was a:

Warm Roof ( Rigid insulation with a vapour control layer (VCL) to the warm side)

Ventilated Cold Roof (there are perimeter vents allowing for through ventilation to the entire roof void[min 50mm void height])

Waterproofing Only / Like-for-Like / Other Roof (the roof is neither a warm roof or a ventilated cold roof)

What was the FLEXITEC Platinum system applied to?

Describe the surface that FLEXITEC Platinum was applied to?

Primer used?

Select all primers that were used on this project

FLEXITEC Primer

SP Primer

Metal Detailing Primer

Twin Pack Epoxy Primer

SA Primer

Other

FLEXITEC Primer powder hardener addition rate (%)

FLEXITEC Primer Accelerator used?

Accelerators are an additive for use in low temperature applications. This is not to be confused with powder hardener.

Other Primer (Give Details)

FLEXITEC Platinum Resin Colour

(If Other) Give Details of the FLEXITEC Platinum Resin colour?

FLEXITEC Platinum Resin Powder Hardener addition rate (%)

FLEXITEC Platinum Resin Accelerator used?

Accelerators are an additive for use in low temperature applications. This is not to be confused with powder hardener.

FLEXITEC Platinum Summer Inhibitor used?

Inhibitors is an additive for use in high temperature applications. This is not to be confused with powder hardener.

Fibreglass (chopped strand) Matting Weight m²

225g /m²

450g /m²

Other (Give Details)

(If Other) Please give further details.

Give details of the Balcony Finish Installed:

(If Other) Please give further details.

Additional Comments or details about this project

FLEXITEC Platinum Resin Batch Number(s)

FLEXITEC Platinum Resin Quantity Used (kg)

FLEXITEC Platinum Accelerator Batch Number(s)

FLEXITEC Platinum Accelerator Quantities (Units)

FLEXITEC Platinum Summer Inhibitor Batch Number(s)

FLEXITEC Platinum Summer Inhibitor Quantities (Units)

Restec 225g CSM Batch Number(s)

Restec 225g CSM quantity (kg)

Restec 450g CSM quantity (kg)

Restec 450g CSM Batch Number(s)

FLEXITEC Platinum Powder Hardener Batch Number(s)

FLEXITEC Platinum Powder Hardener quantity (kg)

FLEXITEC Primer Batch Number(s)

FLEXITEC Primer Quantity Used (kg)

FLEXITEC Primer Accelerator Batch Number(s)

FLEXITEC Primer Accelerator Quantity Used (Units)

SP Primer Batch Number(s)

SP Primer Quantity Used (Ltrs)

Metal Detailing Primer Batch Number(s)

Metal Detailing Primer Quantity Used (Ltrs)

Twin Pack Epoxy Primer Batch Number(s)

Twin Pack Epoxy Primer Quantity Used (Ltrs)

SA Primer Batch Number(s)

SA Primer Application Method

Spray Applied

Roll Applied

ResGrip Batch Number(s)

ResGrip Quantity Used (KG)

Sealer Coat Batch Number(s)

Sealer Coat Quantity Used (KG)

Do you have any photos of the completed roof? We would be grateful if you could upload them.

Drop files here or

Max. file size: 256 MB.

If you would like to receive a copy of this submission, re-enter you email address below.

Consent

I agree to the privacy policy.

By checking the box below, I confirm the following: 1. I have read and accept the Terms and Condition of the Res-Tec Material Guarantee. 2. I request issue of a Res-Tec Installation Number in relation to the installation set out within this form. 3. I verify the roof has been completed in accordance with the current Flexitec 2020 Application Manual. 4. I understand that this guarantee is between myself (as the Installer) and Res-Tec Ltd (as the manufacturer) and in no way does this represent a contract with the beneficiary of the Flexitec 2020 System

Before your start:

Be aware that the Restec Materials Guarantee is only available for the two coat (20 year) FLEXITEC 2020 application. No guarantee is available for the one coat application.
Have your Training Certificate I.D. number handy.
Have an electronic copy of your invoice ready.
Make sure you’ve got all the batch numbers of all the products you used.
Have accurate details regarding the materials quantities used on this installation.
Make sure you’ve read the Terms & Conditions of the FLEXITEC 2020 Guarantee (email enquiries@restecroofing.co.uk if you haven’t seen them)

Installer ID Number(Required)

Installer Name(Required)

Installer Company Name

Email(Required)

Tel No.(Required)

We need your email address so we can send you your Restec Installation Number.

FLEXITEC 2020 Stockist

FLEXITEC 2020 Stockist Location

We require your invoice to validate the use of Restec Materials

Upload Invoice

Email Later

UPLOAD INVOICE

Max. file size: 256 MB.

Email Later

I will send an email attached with all my invoices - SEND EMAIL > admin@restecroofing.co.uk

Note - until received, the guarantee will not be valid

Installation Start Date:(Required)

DD slash MM slash YYYY

Installation End Date:(Required)

DD slash MM slash YYYY

Installation Address ( Including Postcode)(Required)

Roof Size (m²)(Required)

Was the roof single storey?

Yes

Please describe the weather Conditions During Installation

Temperature during installation (°C)

This is was a(Required)

Did you improve / create the falls of the road?

Yes

The roof is situated above

The roof we installed was a:

Warm Roof ( Rigid insulation with a vapour control layer (VCL) to the warm side)

Ventilated Cold Roof (there are perimeter vents allowing for through ventilation to the entire roof void[min 50mm void height])

Waterproofing Only / Like-for-Like / Other Roof (the roof is neither a warm roof or a ventilated cold roof)

What was the FLEXITEC 2020 system applied to?

Describe the surface that FLEXITEC 2020 was applied to?

Primer used?

Select all primers that were used on this project

FLEXITEC Primer

SP Primer

Metal Detailing Primer

Twin Pack Epoxy Primer

SA Primer

Other

FLEXITEC Primer powder hardener addition rate (%)

FLEXITEC Primer Accelerator used?

Accelerators are an additive for use in low temperature applications. This is not to be confused with powder hardener.

Other Primer (Give Details)

FLEXITEC 2020 Resin Colour

(If Other) Give Details of the FLEXITEC 2020 Resin colour?

FLEXITEC 2020 Resin Powder Hardener addition rate (%)

FLEXITEC 2020 Resin Accelerator used?

Accelerators are an additive for use in low temperature applications. This is not to be confused with powder hardener.

FLEXITEC 2020 Summer Inhibitor used?

Inhibitors is an additive for use in high temperature applications. This is not to be confused with powder hardener.

Fibreglass (chopped strand) Matting Weight m²

225g /m²

450g /m²

Other (Give Details)

(If Other) Please give further details.

Give details of the Balcony Finish Installed:

(If Other) Please give further details.

Additional Comments or details about this project

FLEXITEC 2020 Resin Batch Number(s)

FLEXITEC 2020 Resin Quantity Used (kg)

FLEXITEC 2020 Accelerator Batch Number(s)

FLEXITEC 2020 Accelerator Quantities (Units)

FLEXITEC 2020 Summer Inhibitor Batch Number(s)

FLEXITEC 2020 Summer Inhibitor Quantities (Units)

Restec 225g CSM Batch Number(s)

Restec 225g CSM quantity (kg)

Restec 450g CSM quantity (kg)

Restec 450g CSM Batch Number(s)

FLEXITEC 2020 Powder Hardener Batch Number(s)

FLEXITEC 2020 Powder Hardener quantity (kg)

FLEXITEC Primer Batch Number(s)

FLEXITEC Primer Quantity Used (kg)

FLEXITEC Primer Accelerator Batch Number(s)

FLEXITEC Primer Accelerator Quantity Used (Units)

SP Primer Batch Number(s)

SP Primer Quantity Used (Ltrs)

Metal Detailing Primer Batch Number(s)

Metal Detailing Primer Quantity Used (Ltrs)

Twin Pack Epoxy Primer Batch Number(s)

Twin Pack Epoxy Primer Quantity Used (Ltrs)

SA Primer Batch Number(s)

SA Primer Application Method

Spray Applied

Roll Applied

ResGrip Batch Number(s)

ResGrip Quantity Used (KG)

Sealer Coat Batch Number(s)

Sealer Coat Quantity Used (KG)

Do you have any photos of the completed roof? We would be grateful if you could upload them.

Drop files here or

Max. file size: 256 MB.

If you would like to receive a copy of this submission, re-enter you email address below.

Consent(Required)

I agree to the privacy policy.

Before your start:

Have an electronic copy of your invoice ready.
Make sure you’ve got all the batch numbers of all the products you used.
Have accurate details regarding the materials quantities used on this installation.
Make sure you’ve read the Terms & Conditions of the FLEXITEC 2020 Guarantee (email enquiries@restecroofing.co.uk if you haven’t seen them)

– TEST REGISTER

Register Your Roof Installation

SELECT SYSTEM:

Before your start:

Before your start:

Discover Restec

Looking to purchase Restec Products?

Become a Distributor of Restec Systems

Accreditations & Associations

Join Our Newsletter

Systems

Training / Experience

About

Support

Navigation

Register Your Roof Installation

SELECT SYSTEM:

Before your start:

Before your start:

Discover Restec

Looking to purchase Restec Products?

Become a Distributor of Restec Systems

Accreditations & Associations

Join Our Newsletter

Systems

Training / Experience

About

Support

Navigation

Help?